You are not logged in or registered. Please login or register to use the full functionality of this board...
Linuxcat.org
Configuring LSI MegaRAID remote management under CentOS 6.x - Printable Version

+- Linuxcat.org (https://www.linuxcat.org)
+-- Forum: Linux Guides and Troubleshooting (/forumdisplay.php?fid=1)
+--- Forum: Linux Guides (/forumdisplay.php?fid=2)
+--- Thread: Configuring LSI MegaRAID remote management under CentOS 6.x (/showthread.php?tid=61)



Configuring LSI MegaRAID remote management under CentOS 6.x - knifebunny - 04-10-2013 05:49 PM

To remotely manage a CentOS server with an LSI raid card using the LSI MegaRAID software (e.g. under Windows) you first need to install a few libs on the CentOS server


Quote:yum install net-snmp net-snmp-utils libstdc++.i686 unzip csh

Then you need to extract the LSI Linux MegaRAID Storage Manager software onto the
system, you can grab it from the LSI site or here

Then use the install script to unpack the software onto your server

Quote:./install

Once this step has been completed, you can remotely view and control your RAID remotely using the MegaRAID software remotely



Additionally, you may wish to install the LSI "sas2ircu" utility for displaying the status of the controller locally on the system. You can wget the RPM here

example usage: sas2ircu 0 DISPLAY (where '0' is controller card number)